Alloy C276 Stock

Jun 5, 2017 | Technical Blogs

We have added to our corrosion resistant stock grades.  So now we stock standard and cold drawn stainless materials, nickel alloys like Alloy 718, Alloy 625, Alloy 825, our copper based alloys (CA104, C63000, C63200, NES833, etc.) and of course our super corrosion resistant MP35N.  To these we have added Alloy C276, a low carbon nickel-molybdenum-chromium superalloy, compliant with standards such as ASTM B574, UNS N10276, and Werkstoffe 2.4819.

Alloy C276 is resistant to pitting, stress corrosion cracking, and crevice corrosion in a wide range of chemical environments, particularly in chloride gas, hypochlorite and chlorine dioxide solutions.

The chromium content adds resistance to oxidizing media, such as ferric and cupric chlorides, while tungsten is present to provide additional general resistance in a wide range of severe environments.

Welding properties are good, with the low carbon content minimising carbide / grain boundary precipitation during welding to maintain corrosion resistance in the welded finished condition.

This material is used in the most severe environments such as chemical and petrochemical processing involving bleach, pollution control, pulp and paper production, industrial and municipal waste treatment, pharmaceutical and food processing equipment, and process plant involved in the recovery of sour natural gas.  It is ideal for use in evaporators, heat exchangers, sulphuric acid filters and reactors, and process plant handling acid catalysts.

Our stock range in round bar material goes from 10 mm dia to 250 mm dia.

For more information, contact us or visit our product page.

Back to News.

The Broder Blogger.